How to turn when driving: A complete analysis of skills and precautions
Turning is one of the most basic but most error-prone operations in driving. The correct turn method not only improves driving safety, but also reduces tire wear and fuel consumption. This article will combine popular topics and hot contents on the entire network for the past 10 days to analyze in detail how to turn correctly while driving, and provide structured data for reference.
1. Basic steps for turning
1.Observe in advance: Before turning, be sure to observe surrounding vehicles and pedestrians through the rearview mirror and side view mirror to ensure safety.
2.slow down: Appropriately lower the vehicle speed before turning to avoid the vehicle losing control due to centrifugal force.
3.Turn on the steering light: Turn on the steering light 3-5 seconds in advance to remind other vehicles and pedestrians of your driving intentions.
4.Control the steering wheel: Turn the steering wheel smoothly according to the curve size and speed to avoid rushing the direction.
5.Go back to the right direction: After the turn is over, return to the steering wheel in time to keep the vehicle moving in a straight line.
2. Handling skills for different types of bends
| Bend type | Handling skills | Things to note |
|---|---|---|
| Right angle bend | Decelerate to 20-30km/h in advance, and the steering wheel slowly rotates 90 degrees | Pay attention to opposite vehicles and pedestrians to avoid placing lines |
| Continuous curves | Keep constant speed and adjust the steering wheel slightly | Avoid frequent acceleration and deceleration and prevent vehicle rolling |
| Sharp bend | Switch to low gear in advance and use engine traction to reduce speed | Do not brake suddenly to prevent the tire from slipping |
3. Common errors when turning
1.No slowdown: High-speed turns can easily lead to vehicle out of control, especially on slippery roads.
2.No steering lights: Ignoring the use of steering lights will increase the risk of traffic accidents.
3.The steering wheel is too vigorous: Flashing the direction quickly will cause the vehicle to roll or even overturn.
4.Ignore blind spots: No blind spots were checked when turning, and collisions with other vehicles or pedestrians may occur.
4. Discussions related to hot topics and turns in the entire network in the past 10 days
| Hot Topics | Key points of discussion | Relevance |
|---|---|---|
| Autonomous driving turn technology | How AI optimizes turn paths and speed control | high |
| Turning characteristics of new energy vehicles | Effect of center of gravity distribution on turn stability | middle |
| Analysis of turn accidents in rainy days | Anti-slip techniques for turning slippery roads | high |
5. Turning skills in special weather
1.rain: Reduce the vehicle speed to 70% of the dry road surface, avoiding rushing or brakes.
2.Snow days: Decelerate ahead of time before turning, keep the steering wheel stable, and avoid sudden acceleration or braking.
3.Foggy days: Turn on the fog lights and low beams to remind other vehicles by honking them.
6. Summary
Turning a corner may seem simple, but the driver requires the correct skills and precautions. Whether it is a right-angle bend, continuous bend or sharp bend, you need to observe, slow down, turn on the steering light and operate the steering wheel smoothly. In addition, be more cautious when turning in special weather. I hope that through the analysis of this article, you can complete cornering operations more safely and efficiently in daily driving.
Finally, I would like to remind everyone: safe driving is no small matter, be more careful when turning and less danger!
check the details
check the details
en
