How to install built-in tire pressure monitoring
With the continuous development of automobile safety technology, built-in tire pressure monitoring systems (TPMS) have become a must-have for many car owners. It can monitor tire pressure in real time and alert the driver when it is abnormal, effectively avoiding safety hazards such as tire blowouts. This article will introduce in detail the installation steps of built-in tire pressure monitoring and provide relevant data reference.
1. Introduction to the built-in tire pressure monitoring system
The built-in tire pressure monitoring system mainly consists of sensors, receivers and displays. The sensor is installed inside the tire, monitors tire pressure and temperature data in real time, and transmits it to the receiver through wireless signals, which is ultimately displayed on the display.
| components | Function |
|---|---|
| sensor | Monitor tire pressure and temperature and transmit data wirelessly |
| receiver | Receive sensor signals and process data |
| monitor | Display tire pressure and temperature information |
2. Preparations before installation
Before installing the built-in tire pressure monitoring system, you need to make the following preparations:
| steps | Description |
|---|---|
| 1. Buy the right TPMS | Choose a compatible system based on vehicle model and tire size |
| 2. Prepare tools | Including jacks, wrenches, valve removal tools, etc. |
| 3. Check tires | Make sure the tires are not damaged or deflated |
3. Detailed explanation of installation steps
The following are the specific installation steps for the built-in tire pressure monitoring system:
| steps | Operating Instructions |
|---|---|
| 1. Remove the tire | Use a jack to lift the vehicle and remove the tires |
| 2. Remove the original valve | Use the valve removal tool to remove the original valve |
| 3. Install the sensor | Install the sensor to the valve position to ensure a tight seal |
| 4. Reinstall the tires | Install the tire back on the hub and inflate it to standard tire pressure |
| 5. Activate the sensor | Follow the instructions and activate the sensor to pair with the receiver |
4. Precautions after installation
After the installation is complete, you need to pay attention to the following things to ensure the normal operation of the system:
| Things to note | Description |
|---|---|
| 1. Check tire pressure regularly | Make sure the tire pressure is within the standard range |
| 2. Avoid sensor damage | Avoid severe impact or high temperature environment |
| 3. Replace the battery promptly | Sensor battery life is typically 3-5 years |
5. Frequently Asked Questions
Here are frequently asked questions and answers about built-in tire pressure monitoring systems:
| question | Answer |
|---|---|
| 1. Unable to display data after installation | Check if the sensor is activated and the receiver is paired successfully |
| 2. Tire pressure display is inaccurate | Recalibrate sensor or check tires for leaks |
| 3. Sensor signal loss | Check the sensor battery or whether there is signal interference in the surrounding area |
6. Summary
Although the installation of the built-in tire pressure monitoring system requires certain manual skills, most car owners can complete it as long as they follow the steps. After installation, it can not only improve driving safety, but also extend the service life of tires. If you still have questions about the installation process, it is recommended to consult a professional technician or go to a 4S store for installation.
check the details
check the details
en
