Welcome to visit calamus!
Current location:front page >> mechanical

What should I do if there is the sound of running water in the heater?

2025-12-19 01:07:24 mechanical

What should I do if there is a sound of running water in the heater? 10 days of solutions to popular problems across the Internet

Recently, as the temperature in the northern region plummets, the issue of heating use has become a hot topic across the Internet. According to big data statistics, the search volume related to "abnormal heating noise" surged by 300% in 10 days, of which the "heating water sound" problem accounted for as high as 45%. Below is a structured solution to this problem.

1. Hotspot data statistics of the entire network for 10 days

What should I do if there is the sound of running water in the heater?

Hot search keywordsSearch volume (10,000 times)Year-on-year increase
The sound of heating water running28.5320%
The heating is not hot35.2280%
Radiator cleaning12.7190%
Unusual noise due to floor heating9.8410%

2. Analysis of the causes of the sound of running water

Reason typeProportionSpecific performance
gas accumulation62%Intermittent "gurgling" sound
Water flow is too fast23%Continuous "clatter" sound
Pipe impurities15%Accompanied by a "rustling" sound

3. 5-step solution

1.Exhaust treatment: Use the special exhaust key to rotate the exhaust valve counterclockwise until clean water is discharged (it takes about 2-3 minutes).

2.regulating valve: Adjust the opening of the main entrance valve to 60%-70% to avoid turbulence caused by too fast water flow.

3.Check slope: Each meter of pipe should have an inclination of 3-5mm, which can be detected with a level.

4.Clean filter: After closing the valve, disassemble the Y-type filter and clean the 40-mesh filter with a toothbrush.

5.system balance: The flow rate of each circuit of the water distributor should maintain a balance of ±10%.

4. Comparison table of treatments for different heating types

Heating typecharacteristic soundSolution
cast iron radiatormetal clang soundAdd rubber gasket
Steel panelwater howlingInstall pressure reducing valve
Floor heating systemlow frequency resonanceAdjust the mixing center

5. Judgment of professional maintenance timing

It is recommended to contact a professional immediately if the following situations occur:

• The sound of running water lasts for more than 2 hours every day

• Accompanied by obvious pressure gauge fluctuations (>0.05MPa)

• Room temperature drops >3°C

• Rust-colored drainage appears

6. Preventive measures

1. Flush the system before the heating season. It is recommended to use pulse cleaning technology.

2. Install an automatic exhaust valve (it is recommended to choose the copper core stainless steel model).

3. Keep the system pressure stable in the range of 1.5-2Bar.

4. Check pipe insulation annually to avoid condensation accumulation.

According to the latest data from the heating management department, correctly handling the problem of abnormal heating noise can improve heating efficiency by 15%-20% and reduce energy consumption by about 8%. If the above methods still cannot solve the problem, it is recommended to log on to the official website of the local heating company to report for repair. Currently, major cities across the country have implemented a 4-hour emergency response service.

Next article
  • What does 6kw mean?Recently, "6kw" has become a hot topic on the Internet, and many netizens are curious about its meaning. This article will analyze the meaning of "6kw" based on the hot content on the entire network in the past 10 days, and display related discussion trends through structured data.1. Analysis of the meaning of 6kw"6kw" is the abbreviation of "60 million", where "6" represents the number 6, "k" repr
    2026-01-25 mechanical
  • What is the function of transformer oil?Transformer oil is an indispensable and important component of power transformers. It not only plays the role of insulation and cooling, but also protects the internal components of the transformer. This article will introduce in detail the main functions and importance of transformer oil, and provide you with a comprehensive analysis based on the hot topics and hot content on
    2026-01-22 mechanical
  • What is the command pulse?In today's rapidly developing technological field, command pulse (Command Pulse) is an important concept, especially widely used in automation control, communication systems and computer engineering. This article will delve into the definition, working principle, application scenarios and related data of command pulses to help readers fully understand this technology.1. Definition of command
    2026-01-20 mechanical
  • What is a biosafety laboratoryBiosafety Laboratory (BSL) is a closed experimental environment specially designed to handle high-risk biological materials (such as pathogenic microorganisms, viruses, toxins, etc.), aiming to protect researchers, the environment and the public from potential biological hazards. With the frequent occurrence of global public health events (such as the COVID-19 epidemic), the importance o
    2026-01-17 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line